Instructions

Basic Set Up

  • Setting the Date

    Pull the crown once (1 click). Turn the crown counter-clockwise to adjust the desired date, please note that the date will change between 11 p.m. and midnight.

  • Setting the Time

    Pull the crown a second time (2nd click). Turn it clockwise until the watch hands are positioned at the desired time. Reset the crown by pushing it back to its normal position.

  • Changing Straps

    Slide pin sideways to release the strap. Hold pin back while placing strap into holes on either side of the watch. Release lever to secure strap.

Adjust Mesh Strap

  • Step 1

    Release lock plate and remove from locking clasp.

  • Step 2

    Insert a flat screw driver (or similar tool) into slot as shown and pry open the plate clamp. (do not use the locking bar for leverage)

  • Step 3

    Slide locking clasp to desired position.

  • Step 4

    Press plate clamp down to lock into place (use a flat screw driver or similar tool to assist).

  • Step 5

    Place hook over locking bar and close the lock plate.